Samson TROVIS 5724-8 Mounting And Operating Instructions page 38

Appendix
CO/PA Function/
designation
AI4.I1 Input signal, point 1
AI4.COR* Offset AI4
AI4.O1 Output signal, point 1
AI4.I2 Input signal, point 2
AI4.O2 Output signal, point 2
Switching output
M4 Function
M4.T Lag time
M5 Logic
M ... Control
Application
M0 System code number
38
Setting/
adjustment range
0.0 to 99.9 %
–9.9 to 9.9 %
–50 to 150 °C
0.1 to 100.0 %
–50 to 150 °C
0:
1:
2:
3:
4:
5:
6:
7:
8:
0 to 999 s
0:
1:
0: User-defined
1: Heating · Fixed set point control · With one sensor · In-
10: Heating · Fixed set point control · Temperature mean
20: Cooling · Fixed set point control · Differential tempera-
21: Cooling · Fixed set point control · Temperature mean
30: Heating · Follow-up control · Return flow temperature
* Parameters are listed in [Service] folder > Start-up.
None
On with LIM1 / Off with lag time
On with LIM2 / Off with lag time
On at travel > 0 % / Off at 0 % with lag time
On at travel < 100 % / Off at 100 % with lag time
Alarm active
Fixed actuator positioning value [1] reached
Fixed actuator positioning value [2] reached
Manual mode active
Not inverted
Inverted
ternal set point decrease
value calculation using two sensors · Internal set point
decrease
ture between two sensors · Start/stop control sequence
value calculation using two sensors · Start/stop control
sequence
limitation · Internal set point decrease
EB 5724-8 EN