Table of Contents
Advertisement
CONFIGURING THE 900 WINCHESTER UITERFACE BOARD
Pri
ve Select (Location TA)
A shunt is installed to indicate the drive number.
1 is shunted for drive #1, 2
15
shunted for drive #2, etc.
Normally, there is only one Winchester drive, so 1 would be shunted.
4
3
2
1
0
0
0
1
JA
0
0
0
0
Terminating Resistor Pack <Location RPZ>
The 760-5-R220/330 resistor pack is removed on every interface card except the
one for the last drive.
Normally, there is only one Winchester drive so the
resistor pack would stay in.
Figure 2-30
Winchester Interface Cud
IMS International
5000 Series Microcomputer s/7.0 1.8 3/Page 82
j
Advertisement
Table of Contents
