Table of Contents
Advertisement
The drive size can be found by looking at the IMS model number.
The first
digit indicates the size of the drive(s} (5 or 8 inch).
The fourth spot lndicates
the density; a 'Q' indicates a 96 t.p.i. drive and a '0
I
is for a 48 t.p.i. drive.
(Further details about the IMS model number can be found in Appendix E.)
After the drive size is selected, the following command screen will appear.
COMMAND SCREEN
IMS International
5"
48 T.P .1. Floppy Disk Test
PROG
10:
TSTF930
REV 1,0
Drive:
0
double-densi ty
N#: 2
Track: ??
EOT: 10
SC: 10
Head: 0
SRT: 06
GPLl: 20
GPL2:
Sector: 01
HLT: 004C
DLT: 004C
DMA Controller: 8257
Read address:
9900
Free memory:
9900 to 9CFF
Soft errods}: 00 00 00 00
Hard error(s}: 00 00 00 00
Command:
Write address:
9900
Radix: Hex
FDC base: CO
Seek verify: ON
DESCRIPTION OF COMMAND SCREEN
Heading:
PROG 10:
Drive:
Track:
Head:
Sector:
Density:
Make sure this matches the type of drives in the system.
Program name and Rev level.
Currently selected drive
Upon initialization the current track is unknown.
The currently
selected track will be displayed during test.
Currently selected head
Currenty selected sector
Currently selected density
IMS International
5000 Series Microcomputers/7.01.83/page 109
Advertisement
Table of Contents
