Table of Contents
Advertisement
Shock
Operating and non-operating
(wi thout tr ans it lock)
Non-operating
(with transit lock)
Interface
Indicators
IMS International
5000 Series Microcomputers/7.0 1.83/page 98
3g pk, less than 10 ms
max 2 per second.
20g pk, less than 20 ms,
max 1 per 10 second
ST506 variant of SA1000
Two red LED's fixed to the master
electronics board are visible through the
facia when they are illuminated.
The "Power-On" LED is on when
the drive is READY with no error
condi tion present.
It is also used
to indicate fault conditions in the
drive.
The "Select" LED is on when the
d r i v e iss el e c ted by the h
0
s t
provided the "Power-On" LED is
on.
The "Power-On" LED is positioned
closest to the center of the facia.
Note
that this LED will not come on if the
condition 2.5.1, 5V risetime, is not
met since the microprocessor will not
receive an initial reset.
\
J
Advertisement
Table of Contents
