Regular System Check-Up - Salda RIRS EKO 3.0 1900 HE Mounting And Installation Instruction

DTJ
Temp. and humidity sensor for
100
extract air.
Supply air temperature sen-
TJ
sor.
Exhaust air temperature sen-
TE
sor
PV Supply air fan.
IV Extract room(s) air fan.

20.2. REGULAR SYSTEM CHECK-UP

The operation of the switching device (contactor) should be visually inspected every 3–4 months (the casing cannot be melted and should have
no other signs of the thermal damage, no extra sounds should be generated while switching or during impact).
The blade switch should be disconnected during service (if installed on the device). If blade switch is not installed, disconnect the power supply
from the distribution panel.
RIRS 1200-5500 H EKO 3.0 v2019.06
X34 7 A4
X34 8 A4
X38 1
X38 2
X40 1
X40 2
X40 3
X39 1
X39 2
X41 1
X41 2
X37 1 V1
X37 2 COM
X37 3 V2
X37 4 COM
Fans guard
COM
Extract air temperature sensor
COM
+5V
Extract air humidyti sensor
COM
Supply air temperature sensor
COM
Exhaust air temperature sensor
COM
Supply air fan 0-10V
COM
Extract air fan 0-10V
COM
DI - -
- - -
AI - -
- - -
- - -
AI - -
- - -
AI - -
- - -
AI - -
- - -
AO - -
- - -
AO - -
- - -
EN | 21