Managing Cases; Patient's Case Files - Planmeca Chairside PlanScan User Manual

22 MANAGING CASES

22.1 Patient's case files

22.1.1 Inactivating files
User's manual
All data are automatically stored into Planmeca Romexis
database and organized into cases which can be
exported to another system or sent to a certified
laboratory for design and milling using Planmeca
Romexis Cloud service (see 26 "SENDING AND
RECEIVING CASES VIA PLANMECA ROMEXIS
CLOUD" on page 127
To open an existing scan or restoration (crown, inlay,
onlay etc.) double-click on a case on the list or click the
Open Restoration button
The case opens in the
PlanScan scanner.
3D module
To open a case in
select View STL in 3D Module.
By clicking this button on the top right corner of the
Patient's Case Files
window you can extend/reduce the
window size.
To inactivate an image (stl file) from the patient's case
files right-click on the file and select Inactivate STL.
To delete a case from the patient's case files right-click on
the case and select Inactivate restoration.
To reactivate or permanently delete a case from the
database see section 22.3 "Inactivate" on page 117.
Planmeca Chairside CAD/CAM solution
22 MANAGING CASES
Setup
tab of the Planmeca
right-click on the case and
115