Safety Requirements - Ametek Chandler Engineering 3065 Instruction Manual

PREFACE P-3

Safety Requirements

READ BEFORE ATTEMPTING OPERATION OF INSTRUMENT
The Chandler Engineering Model 3065 Wettability Tester is designed for operator safety.
Any instrument that is capable of high temperatures should always be operated with
CAUTION!!
To ensure safety:
• Locate the instrument in a low traffic area.
• Post signs where the instrument is being operated to warn non-operating personnel.
• Read and understand instructions before attempting instrument operation.
• Observe caution notes!
• Observe and follow the warning labels on the instrument.
• Never exceed the instrument maximum temperature ratings.
• Always disconnect main power to the instrument before attempting any repair.
• Turn off the heater at completion of each test.
• Appropriately rated fire extinguishers should be located within close proximity.
• Surface of heater jacket can become hot! Use a glove for protection when touching the
cup handle. Burns may result if caution is not exercised.
Before attempting to operate the instrument, the operator should read and understand this
manual.