Table of Contents
Advertisement
Operation
Rethermalization Mode
Setting the temperature
Regenerating
248°F
Additional
function
Setting the time
248°F
Additional
function
Probe Temperature Setting
212°F
Additional
function
Humidity Control
Using Retherm mode
158°F
1:18
1:20
212°F
212°F
Displaying actual
temperatures
Changing the setting
End of Retherm mode
This mode is used to reheat meals on plates or dishes, or cooked
foods in pans or on grids, without any loss of quality. This mode has
a special pre-set air circulation setting.
Press the "On/Off" button.
Press the "Retherm" button and the display shows "248°F
and "0:00".
0:00
Turn the CombiDial to confirm.
Hom
Temperature range: 86°F - 356°F (30°C -180°C).
Select the time by turning the CombiDial.
Time can be set from 1 min - 9 hours 59 min.
Continuous mode
---
the left and hold for 3 seconds ‹ the time display changes to "---" for
Home
Continuous Run.
Press the CombiDial twice after setting the retherm
temperature
to set the probe temperature. Turn the CombiDial to
desired temperature and then press it to confirm the probe
176°F
temperature.
Home
Note: If a cooking time is entered before entering the final core
temperature, the control system will ignore this, as the core
temperature always takes priority.
Press the CombiDial twice after setting the setpoint core temperature
and set the steam quantity. The steam quantity can be set from 0-
100% in 10% steps with the CombiDial.
After setting the temperature and timer, or probe temperature, press
the "Start/Stop" button. (The unit can be heated by pressing the
Ready2Cook button.) The display now shows the selected cooking
temperature, along with the time or probe setting.
the actual cooking time, and the actual probe temperature if in
176°F
Continuous Run.
The temperature display shows the remaining cycle time (in
continuous mode "---" ) or the actual core temperature.
To display the actual cooking temperature, press and hold the
Cooking Temperature button.
Time, temperature and probe temperature can be changed during a
cooking cycle by pressing the selection function using the
CombiDial to make changes.
After the moist heat time is over and the probe temperature is
reached, a buzzer sounds
t
hat the cycle is over. Pressing the "Start/Stop" button before
opening the door cancels the program.
1.The duration of the sound and flashing is adjustable.
see Page . .
Electric Space$aver™
Space$aver™
:
With time set to "0:00", turn the CombiDial to
1
and the interior lights flashes
(120°C)
.
It also displays
, indicating
25
Advertisement
Table of Contents
