Apache Labs ANAN-100/D Manual page 34

(lower left), check "20db mic boost" and try again to adjust the "MIC" gain control on the main P*SDR
window for 0 db on voice peaks.
If you are still unable to achieve 0 db on voice peaks you can try increasing the Setup, Transmit tab "Mic Gain
Max" to 30 db and try again to adjust the "MIC" gain control on the main P*SDR window for 0 db on voice
peaks.
9. If you are still unable to achieve 0 db on voice peaks:
(a) Check your JP4, JP5 and JP6 jumper settings on the Hermes board.
(b) Try a different mic.
10. To enable or disable COMPRESSION you click on the COMP button. We recommend that you set
COMPRESSION to no more than 6dB.
Revision v1.8 April 23, 2013
Apache Labs ANAN-100/D
34 of 70 authors N9VV and KC9XG