Advertisement
c. For 600/800 models use harness
• Connector (3a) will get connected to the chassis
harness.
• Connector (3b) is a spare connector for use with
additional accessories.
• Connectors (3c) connect to the USB terminals on
the bag.
6. MOUNT HANDLEBAR BAG.
a. Ensure the USB harness connections are
connected to USB terminals on the back of the
bag. Place bag into position as shown.
e
.
Instr 9928802
Rev 01 2018-06
b. Place bag over top of handlebars being sure
wires are routed downward along the
handlebar post.
c. Secure bag onto handlebars with the two hook
and loop fastener panels on each side of bag.
Page 5 of 8
Advertisement
