Download Print this page
Polaris 2883419 Quick Start Manual
Polaris 2883419 Quick Start Manual

Polaris 2883419 Quick Start Manual

Trailerable cover kit

Advertisement

Quick Links

TRAILERABLE COVER KIT
P/N 2883419, 2883840
APPLICATION
Verify accessory fitment at Polaris.com.
BEFORE YOU BEGIN
Read these instructions and check to be sure all parts and tools are accounted for. Please retain these
installation instructions for future reference and parts ordering information.
KIT CONTENTS
This Kit includes:
Kit PN 2883419 shown; Kit PN 2883840 similar.
REF
QTY
PART DESCRIPTION
1
1
Vehicle Cover
1
Instructions
TOOLS REQUIRED
• Safety Glasses
IMPORTANT
Your Trailerable Cover Kit is exclusively designed for your vehicle. Please read the installation instructions
thoroughly before beginning. Installation is easier if the vehicle is clean and free of debris. For your safety, and to
ensure a satisfactory installation, perform all installation steps correctly in the sequence shown.
NOTE
Instr 9928598
Rev 03 2018-04
Page 1 of 4
PART NUMBER
-
9928598

Advertisement

loading

Summary of Contents for Polaris 2883419

  • Page 1 Read these instructions and check to be sure all parts and tools are accounted for. Please retain these installation instructions for future reference and parts ordering information. KIT CONTENTS This Kit includes: NOTE Kit PN 2883419 shown; Kit PN 2883840 similar. PART DESCRIPTION PART NUMBER Vehicle Cover Instructions...
  • Page 2: Installation Instructions

    ASSEMBLY TIME Approximately 5 minutes INSTALLATION INSTRUCTIONS 1. Shift vehicle transmission into “PARK”. Turn ignition switch to “OFF” position and remove key. 2. Before cover installation: • Examine vehicle for any accessories that extend outside of ROPS or vehicle body to ensure proper fit of cover and prevent damage.
  • Page 3 5. Secure rear of cover. d. Operate ratchet mechanism until slack is removed, then EXAMINE ALL FOUR TIRES to a. Partially close ratchet ensure strap is positioned BELOW lower tire lugs as shown. Adjust as necessary. b. Thread RH strap through loop on end of center strap.
  • Page 4 6. Secure middle of cover by connecting male 7. Ensure fuel filler zipper is fully closed. buckles on each end of center strap to female 8. If buffeting occurs during transport then remove or buckles sewn into cover. Tighten strap as adjust cover.

This manual is also suitable for:

2883840