To Disable The Traction Control; Ignition Switch - Triumph Bonneville Bobber 2016 Owner's Handbook Manual

To Disable the Traction Control

To disable the traction control setting;
Make sure the motorcycle is stationary
and in neutral.
Turn the ignition to the ON position and
put the engine start/stop switch in the
RUN position.
Press and release the SCROLL button
on the left hand handlebar switch
housing until 'ttcOn' is shown in the
display.
Press and hold the SCROLL button for
more than one second to change
between traction
traction control off.
1. Traction control off display
control on and
1
General Information

Ignition Switch

Warning
For reasons of security and safety,
always turn the ignition to the OFF or
PARK position and remove the key when
leaving the motorcycle unattended.
Any unauthorized
motorcycle may cause injury to the
user, other road users and pedestrians
and may also cause damage to the
motorcycle.
1
1. Ignition switch
2. OFF position
3. ON position
4. PARK position
use of the
2
3
4
33