Steering Lock - Triumph Bonneville Bobber 2016 Owner's Handbook Manual

The ignition key operates the ignition
switch and the steering lock.
When the motorcycle is delivered from
the factory, two ignition keys are
supplied together with a small tag
bearing the key number. Make a note of
the key number and store the spare key
and key number tag in a safe place
away from the motorcycle.
There is a transponder within the
ignition keys to turn off the engine
immobilizer. To
immobilizer functions correctly, always
have only one of the ignition keys near
the ignition switch. Having two ignition
keys near the switch may interrupt the
signal between the transponder and the
engine immobilizer. In this situation the
engine immobilizer will remain active
until one of the ignition keys is removed.
Always get replacement keys from your
authorized Triumph dealer. Replacement
keys must be
motorcycle's immobilizer
authorized Triumph dealer.
make sure the
'paired' with the
by your
General Information

Steering Lock

Warning
Always disengage the steering lock
before riding as, with the steering lock
engaged, it will not be possible to turn
the handlebars or steer the motorcycle.
Riding without motorcycle steering
control will lead to loss of control and
an accident.
1
cjwa_a
1. Steering lock
This is a two position, key operated
steering lock.
To engage the steering lock:
Insert the key.
Turn the handlebars fully left before
turning the key clockwise.
Remove the key.
To disengage the steering lock:
Insert the key and at the same time
turn the handlebars slightly to relieve
any weight on the lock.
Turn the key counterclockwise.
Remove the key.
35