Tool Kit; Seat Adjustment - Triumph Bonneville Bobber 2016 Owner's Handbook Manual

Tool Kit

The tool kit consists of an adjustment
tool and inspection cap tool.
The adjustment tool is attached to the
inside of the left hand side panel. The
adjustment tool can be used for many
tasks including locking in place the
chain tensioner.
The inspection cap tool is attached to
the fuse box which is located under the
left hand side panel. The inspection cap
tool is used to open the cap on the
sprocket cover to view the brake fluid
level reservoir.
General Information

Seat Adjustment

Caution
To prevent damage to the seat or seat
cover, care must be taken not to drop
the seat. Do not lean the seat against
the motorcycle or any surface which
may damage the seat or seat cover.
Instead, place the seat, with the seat
cover facing upwards, on a clean, flat
surface which is covered with a soft
cloth.
Do not place any item on the seat
which may cause damage or staining
to the seat cover.
Note:
• The seat assembly can be adjusted
for position along the seat mount
by up to 1.18 in (30 mm).
To adjust the seat:
Remove the front fastener from the
seat assembly.
1
2
1. Seat
2. Right hand side fastener
3. Left hand side fastener
4. Front fastener
3
4
45