To Disable The Traction Control - Triumph Bonneville T100 Series Owner's Handbook Manual

Hide thumbs Also See for Bonneville T100 Series:
Table of Contents

Advertisement

To Disable the Traction Control

Warning
After riding off-road with traction
control disabled, always make sure
that the traction control is enabled
when returning to ride on public roads.
Riding on public roads with the
traction
control
accelerating too hard on wet/slippery
road surfaces, cause the rear wheel
to slip resulting in loss of motorcycle
control and an accident.
To disable the traction control setting:
Make
sure
stationary and in neutral.
Turn the ignition to the ON position
and
put
the
switch in the RUN position.
Press
and
button on the left hand handlebar
switch housing until 'ttcOn' is shown
in the display.
disabled
may,
the
motorcycle
engine
start/stop
release
the
SCROLL
General Information
Press and hold the SCROLL button
for more than one second to change
between traction control on and
traction control off.
if
1.
Traction control off display (Street Twin
shown)
is
1
49

Advertisement

Table of Contents
loading

Table of Contents