Triumph Bonneville Bobber 2016 Owner's Handbook Manual page 48

General Information
Nuts, Bolts, Fasteners: Visually check that
steering and suspension components,
axles, and all controls are properly
tightened or fastened. Inspect all areas
for loose/damaged fasteners.
Steering Action: Smooth but not loose
from lock to lock. No binding of any of
the control cables (see page 88).
Brakes: Pull the brake lever and push
the brake pedal to check for correct
resistance. Investigate any lever/pedal
where the travel is excessive before
meeting resistance, or if either control
feels spongy in operation (see page 83
and page 83).
Brake Pads: Check that the correct
amount of friction material is remaining
on all the brake pads (see page 82).
Brake Fluid Levels: No brake fluid
leakage. Brake fluid levels must be
between the MAX and MIN marks on
both reservoirs (see page 83).
48
Front Forks: Smooth action. No fork oil
leakage (see page 90).
Throttle: Make sure that the throttle
grip returns to the idle position without
sticking (see page 76).
Clutch: Smooth operation and correct
cable free play (see page 77).
Coolant: No coolant leakage. Check the
coolant level in the expansion tank
(when the engine is cold) (see page 73).
Electrical Equipment: All lights and horn
function correctly (see page 37).
Engine Stop: Engine start/stop switch
turns the engine OFF when the switch is
moved to the
page 36).
Stands: Returns to the fully up position
by spring tension. Return springs not
weak or damaged (see page 43).
STOP position (see