Side Panels - Triumph Bonneville Bobber 2016 Owner's Handbook Manual

General Information
The motorcycle is equipped with a side
stand on which it can be parked.
Note:
• When using the side stand, always
turn the handlebars fully to the left
and leave the motorcycle in first
gear.
Whenever the side stand is used, before
riding, always make sure that the stand
is fully up after first sitting on the
motorcycle.
For instructions on safe parking, refer
to the 'How to Ride the Motorcycle'
section.
44

Side Panels

The left hand side panel can be removed
to gain access
adjustment tool and inspection cap tool.
To remove either side panel:
Grasp the panel firmly in both hands
and pull the lower edge of the panel
away from the motorcycle until the
spigot clears the retaining grommet
(leaving the grommet in place).
Slide the side panel rearwards and lift
the side panel clear of the locating
tangs.
To re-install either side panel:
Slide the side panel forwards while place
the locating tangs into the side panel
locating slots.
Position the spigot to the grommet.
Press firmly to secure the panel.
Grasp the panel and make sure that it is
fully retained.
1
4
cjxe
1. Locating tangs
2. Side panel locating slots
3. Spigot
4. Grommet
to the fuse box,
2
3