Ignition Key - Triumph Bonneville Bobber 2016 Owner's Handbook Manual

General Information
Engine Immobilizer
The ignition switch housing acts as the
antenna for the engine immobilizer.
When the ignition switch is turned to
the OFF or PARK position and the
ignition key is removed, the engine
immobilizer is on. The engine immobilizer
is turned off when the ignition key is in
the ignition switch and it is turned to
the ON position.
Switch Location
The ignition switch is located below the
rear edge of the fuel tank, on the right
hand side of the motorcycle.
Switch Operation
This is a three position, key operated
switch. The key can be removed from
the switch only when it is in the OFF or
P (PARK) position.
To turn the switch from OFF to ON,
insert the key and turn the key
clockwise to the ON position.
To turn the switch from ON to PARK,
push the key barrel further into the lock
and turn clockwise to the PARK position.
Use the PARK position only when
temporarily leaving the motorcycle in a
situation where the tail, license and
position lights must remain on.
To turn the key back to OFF, turn the
key counterclockwise.
34

Ignition Key

Warning
Additional keys, key rings/chains or
items attached to the ignition key may
interfere with riding, leading to loss of
motorcycle control and an accident.
Remove all additional keys, key rings/
chains and items from the ignition key
before riding the motorcycle.
Caution
Additional keys, key rings/chains or
items attached to the ignition key may
cause damage to the motorcycle's
painted or polished components.
Remove all additional keys, key rings/
chains and items from the ignition key
before riding the motorcycle.
Caution
Do not store the spare key with the
motorcycle as this will reduce all
aspects of security.
cixj
1. Key number tag
1