To Disable The Traction Control; Ignition Switch/Steering Lock - Triumph Thruxton TFC 2019 Owner's Handbook Manual

General Information

To Disable the Traction Control

To disable the traction control setting:
• Make sure
stationary and in neutral.
• Turn the ignition to the ON position
and put the
switch in the RUN position.
• Press and
button on the left hand handlebar
switch housing until 'ttcOn' is shown
in the display.
• Press and hold the SCROLL button
for more than one second to change
between traction control on and
traction control off.
1. Traction control off display
36
the motorcycle
engine start/stop
release the SCROLL
1

Ignition Switch/Steering Lock

is
For reasons of security and safety,
always turn the ignition to the OFF
or PARK position and remove the
key when leaving the motorcycle
unattended.
Any unauthorized
motorcycle
the user,
pedestrians
damage to the motorcycle.
With the key in the LOCK or P position
the steering will become locked.
Never turn the key to the LOCK or
P positions while the motorcycle is
moving as this will cause the steering
to lock. Locked steering will cause loss
of motorcycle control and an accident.
3
4
5
1. Ignition switch/Steering lock
2. ON position
3. OFF position
4. LOCK position
5. PARK position
Warning
use
may cause injury
other road users
and may also
Warning
of the
to
and
cause
2
1