Headlight/Position Light Bulb Replacement - Triumph America Handbook

Maintenance and Adjustment
Headlight/Position Light Bulb
Replacement
2
cebs
1. Headlight rim screws
2. Headlight bowl
• Disconnect the battery, negative
(black) lead first.
• Remove the headlight rim screws.
• Detach the headlight and
assembly from the headlight bowl.
• While supporting the light unit,
disconnect the multi-pin electrical
connector from the headlight bulb
and the two spade connectors from
the position light.
• Remove the rubber dust cover.
• Unhook the headlight bulb's wire
retainer.
• The headlight bulb can now be
removed.
• To remove the position light bulb,
detach the bulb holder from the
headlight body and release the bulb.
88
• Installation is the reversal of removal.
2
1
T908049
1. Wire retainer
2. Headlight bulb
3. Position light
Do not reconnect the battery until the
rim
assembly process has been completed.
Premature battery reconnection could
result in ignition of the battery gases
causing risk of injury.
The bulb becomes hot during use. Always
allow sufficient time for the bulb to cool
before handling.
When reconnecting the battery, connect
the positive (red) lead first.
1
3
Warning
Warning
Caution