Headlight/Position Light Bulb Replacement - Triumph Street Twin Owner's Handbook Manual

Maintenance And Adjustment
Headlight/Position Light Bulb
Replacement
Warning
The bulbs become hot during use.
Always allow sufficient time for the
bulbs to cool before handling. Avoid
touching the glass part of the bulb. If
the glass is touched or gets dirty, clean
with alcohol before reuse.
Caution
The use of non‑approved headlight
bulbs may result in damage to the
headlight lens.
Use a genuine
headlight bulb as specified in the
Triumph Parts Catalogue.
Always have replacement headlight
bulbs installed
Triumph dealer.
1
1. Headlight rim screws (one of two)
132
Triumph supplied
by an authorised
Disconnect the battery, negative (black)
lead first.
Remove the headlight rim screws.
Detach the headlight and rim assembly
from the headlight bowl.
Street Twin, Street Scrambler and
Bonneville T100
1
cizy_1
1. Wire retainer
2. Headlight bulb
3. Position bulb
While supporting
disconnect the
connector from the headlight bulb and
the connector from the position light.
Remove the rubber dust cover.
Unhook the headlight
retainer.
The headlight bulb can now be removed.
To remove the position light bulb, detach
the bulb holder from the headlight body
and release the bulb.
Installation is the reversal of removal.
3
the light unit,
multipin electrical
bulb's wire