R82 High-low indoor Manual page 8

B
E
N
D
A
0° - 30°
-10° - 20°
C
E
F
HIGH-LOW:X HYDRAULIC SZ. 2
OUTDOOR FRAME
The instructions below are for High-low:x hy-
draulic.
The frame is height adjustable from floor to
table height. By stepping on the foot pedal (A)
the height is adjusted upwards by using a pum-
ping motion of the foot. The seat is lowered by
putting your foot under the foot pedal, lifting up
the pedal by which the seat is lowered.
Be careful when lowering this frame from
the highest position to the lowest because
of the risk of finger entrapment etc.
If the the chair has to be used in the lowest
position, the foot rest has to be removed
first.
The seat is angled by lightly pressing down the
handle (B) and pushing against the seat back.
The handle is also equipped with a security
knob. This must be deactivated before use.
It is important to press down on the back
while the seat is angled to ensure a slow
angling.
Let go of the handle and the seat is "locked" in
the wanted posi tion. Activate the security knob.
Activate the brake with the foot (C).
The frame is very easy to fold (D). Lift up the foot
pedal (A) and the seat unit can be pushed down
to floor height. Then loosen the handles (E) at
both sides and fold the hand brace.
The push brace is adjustable in height (F).
The High-low:x outdoor frame is approved
for transportation of children in vehicles.
8