R82 High-low indoor Manual page 6

B
E
N
D
A
0° - 30°
-10° - 20°
C
E
F
HIGH-LOW SZ. 1
HIGH-LOW:X SZ. 1+2
OUTDOOR FRAME
The instructions below are for High-low and for
High-low:x.
The frame is height adjustable from floor to table
height. When pressing the foot pedal (A) the
height is adjusted individually. The foot pedal is
equipped with a security knob. Turn the lock to
the left and it is activated, turn it to the right and
it is deactivated.
Entrapment Hazard! be careful not to
get anything caught between the
frame and foot pedal when pressing the
foot pedal downwards
Be careful when lowering this frame from
the highest position to the lowest because
of the risk of finger entrapment etc.
If the the chair has to be used in the lowest
position, the foot rest has to be removed
first.
Further, angle the seat by lightly pressing down
the handle (B) and pushing against the seat
back.
The handle is also equipped with a security
knob. This must be deactivated before use.
It is important to press down on the back
while the seat is angled to ensure a slow
angling.
Let go of the handle and the seat is "locked" in
the wanted posi tion. Activate the security knob.
Activate the brake with the foot (C).
The frame is very easy to fold (D). Activate the
footpedal (A) and the seat unit can be pushed
down to floor height. Then loosen the handles
(E) at both sides and fold the hand brace. The
push brace is adjustable in height (F).
The High-low/High-low:x outdoor frame is
approved for transportation of children in
vehicles.
When mounting a Panda Futura size 4 on
a High-low/High-low:x frame, you MUST
mount anti-tip device.
6