Table of Contents
Advertisement
12.3.1 Specific feature for the use of hand-held scanners
(bar code and 2D devices, combi devices with RFID)
Notice!
For a description of device configuration and the required codes, please see the
corresponding documentation at www.leuze.com -> Download -> identify -> Bar code
hand-held readers or 2D code hand-held readers.
12.3.1.1 Cable-connected hand-held scanners on the MA
All hand-held scanners and mobile combi devices available in the Leuze electronic product
line can be used with the corresponding connection cable.
When using the MA 208i, the voltage supply of the hand-held scanner (5 V/at 1 A) can be
connected to the interface by means of a cable via the 9-pin Sub-D connector (voltage on
PIN 9). The corresponding cable is to be selected for the respective hand-held scanner and
ordered separately. The 9-pin Sub-D cable (KB JST-HS-300, Part No. 50113397) is
connected to this cable, which is connected to the MA 208i. This cable must also be ordered
separately.
In this example, triggering occurs by means of a trigger button on the hand-held scanner.
12.3.1.2 Wireless hand-held scanners on the MA
All wireless hand-held scanners and mobile combi devices available in the Leuze electronic
product line can be used with the corresponding connection cable via the base station.
A 230 VAC connection (socket) is usually necessary for the charging station. Here, a data
connection of the charging station is established with the MA 208i. The corresponding cable
is to be selected for the respective hand-held scanner and ordered separately. The 9-pin
Sub-D cable (KB JST-HS-300, part no. 50113397) is connected to this cable, which is
connected to the MA 208i. This cable must also be ordered separately.
In this example, triggering occurs by means of a trigger button on the hand-held scanner.
The following codes for configuring the devices are necessary for these devices as well.
Leuze electronic
Commissioning and configuration
208i
208i
MA
208i
57
Advertisement
Table of Contents
