Device Interfaces; Rs 232 Device Interface (Accessible After Opening The Device, Internal) - Leuze electronic MA 208i Technical Description

Notice!
Ensure adequate shielding. The entire connection cable must be shielded and earthed. The
signal lines must be stranded in pairs.
Use CAT 5 cable for the connection.
Notice!
For the MA
termination on the BUS OUT socket is not mandatory!
7.5

Device interfaces

Figure 7.4:
7.5.1

RS 232 device interface (accessible after opening the device, internal)

The device interface is prepared for the system plugs (PCB connectors) for Leuze devices
RFI xx, RFM xx, BCL 22 as well as BCL 32, VR with KB 031.
Figure 7.5:
Leuze electronic
208i as standalone device or as the last participant in a linear topology,
Open the MA 208
RS 232 device interface

MA 208i
Electrical connection
31