Operating Instructions; Seat Adjustments; Pedal Strap Operation; Display Panel Features - Star Trac UB Sport Upright Bike Owner's Manual

O
PERATING
Operating the STAR TRAC SPORT BIKE is very easy. Simply mount the bike, begin pedaling, and press QUICK START.
Learning the features and incorporating the STAR TRAC SPORT BIKE into your members' fitness programs is just as easy. In
this chapter, you will learn the display function and how to get the most out of every STAR TRAC SPORT BIKE workout.
IMPORTANT: Before operating the bike, you must be familiar with the following equipment limitations:
■
Maximum Weight: Your STAR TRAC SPORT BIKE is designed for a maximum user weight of 350 lbs/159 kg. DO NOT
exceed the maximum user weight.

SEAT ADJUSTMENTS

Proper seat positioning helps ensure maximum exercise efficiency and comfort, while reducing the risk of injury. Always adjust
the seat position prior to beginning your workout.
IMPORTANT: When adjusting the seat height for either bike, your knee should never completely "lock out" during any portion of
the cycle pattern.
Adjusting Seat Height (Sport Upright Bike)
When sitting on the seat of your Sport Upright Bike, your knees should be almost fully extended when the pedals are at the
lowest point of their rotation. To adjust the seat height:
NOTE: When raising the seat, the seat will ratchet up when pulled. When lowering the seat, you must use the seat release
knob.
With the pedal at its lowest point of rotation, stand on the pedal with your knee slightly bent. To raise the seat, carefully
lift up on the "nose" of the saddle and raise the seat to the desired position (the seat release knob does not need to be
pulled out). To lower the seat, carefully pull out on the seat release knob (located at the rear of the seat tube) and lower
the seat to the desired position. Release the knob, ensuring that the spring retracts to its original position, and that the
seat stays firmly in place.
Note your height adjustment (shown on the front of the seat post) for future reference. This number is the highest
number visible on the seat post.
Adjusting Seat Position (Sport Recumbent Bike)
When sitting on the seat of your Sport Recumbent Bike, your knees should be almost fully extended when the pedals are at the
lowest point of their rotation. To adjust the seat position:
Sit on the seat and grasp the seat adjustment handle (located under the seat). Lift up on the handle, and slide the seat
forward or backward on the seat carriage to the closest available position that allows your knees to be slightly bent
toward the lower pedal. Release the handle, ensuring that the spring retracts to its original position, and that the seat
stays firmly in place.
Note your height adjustment (shown on the top of the seat rail either in front of or behind the seat) for future reference.

PEDAL STRAP OPERATION

The pedal straps should be adjusted to hold each foot comfortably but firmly on the pedal. Place your foot on the pedal, then
adjust the pedal strap as necessary. Pull the free end of the strap down to tighten. Press the release button to loosen.

DISPLAY PANEL FEATURES

Your STAR TRAC SPORT BIKE is equipped to provide you and your users unlimited exercise opportunities. Experiment with
its features to find the right combination for your fitness regimen. The Display panel provides the operating controls and display
elements described in the following paragraphs, and is consistent for both the STAR TRAC SPORT UPRIGHT BIKE and
STAR TRAC SPORT RECUMBENT BIKE.
STAR TRAC SPORT BIKES O
I
NSTRUCTIONS
' M
WNER S ANUAL
17