Operating Instructions; Seat Adjustments; Pedal Strap Operation; Display Panel Features - Star Trac S-UBx Owner's Manual

8. If you wish to pause the program, stop pedaling. The bike enters pause mode and a "P" flashes in the T
Resume pedaling within 25 seconds to continue your workout.
9. If desired, you can jump to another preset program if your remaining workout time is greater than 5 minutes.
To jump to another preset program, press the
n
10. When you have reached your workout goal, the bike enters the Cooldown cycle (see "Cooldown Cycle" for details). If you
wish to exit the program before you have reached your workout goal, stop pedaling and allow the Pause timer to expire.

ADVANCED WORKOUTS PROGRAMS

The A W programs include the H
DVANCED ORKOUTS EART
W programs and the A P program. When using the H
ORKOUTS UTO ILOT
(rather than the heart rate grips) is recommended.
H R C P
EART ATE ONTROL ROGRAMS
A W offers both a D H R
DVANCED ORKOUTS YNAMIC EART ATE
well as the B F program.
URN AT
NOTE: For best results, use a heart rate strap. If user is wearing a heart rate strap, the bike will automatically use the data from
the heart rate strap.
To operate the Constant Heart Rate Control program:
This heart rate feature is designed to maintain your heart rate at a constant level by controlling pedaling resistance and
prompting you to pedal at a specified RPM. Please note that your heart rate may vary above and below your target heart rate
during this program.
1. Mount the bike (please refer to "Seat Adjustments" section) and begin pedaling.
If necessary, enter the Lockout ID to enable the bike for operation (see "Lockout ID Processing" for details).
n
2. Press the key.
3. You are p rompted to select the desired A
DVANCED
T programs, then press the key when prompted to select C
RAINING
4. You are prompted to enter your weight. The bike displays a default weight of 155 pounds (70 kg). You may enter any
weight from 0 to 500 pounds (0 to 226 kg).
Use the keys to enter your current weight; or press the
n
the displayed weight in 1 pound (or 1 kg) increments.
When your correct weight has been entered, press the
n
5. You are prompted to enter a time goal. The bike displays a default time of 99 minutes. You may enter any time from 1 to
99 minutes.
Use the keys to enter your desired time goal; or press the
n
decrease the displayed value in 1 minute increments.
When your desired goal has been entered, press the
n
6. You are prompted to enter your age.
Use the keys to enter your age, or press the
n
displayed value in 1 year increments.
When your correct age has been entered, press the
n
7. You are prompted to enter a target heart rate. The bike displays a default target heart rate that is based on 70% of your
theoretical maximum heart rate (220 BPM - age). You may enter any value from 70 to 200 BPM.
Use the keys to enter your target heart rate, or press the
n
the target heart rate in 1 BPM increments.
When the desired target heart rate has been entered, press the
n
24
or key, as desired.
R T and B F programs, the F T
ATE RAINING URN AT ITNESS
R T programs, use of the heart rate strap
EART ATE RAINING
C program and a C H R C
ONTROL ONSTANT EART ATE ONTROL
W program. Press the key to select the H
ORKOUTS
H R C .
ONSTANT EART ATE ONTROL
or key, as necessary, to increase or decrease
key to accept the displayed value.
or key, as necessary, to increase or
key to accept the displayed value.
or key, as necessary, to increase or decrease the
key to accept the displayed value.
or key, as desired, to increase or decrease
key to accept the displayed value.
STAR TRAC S SERIES BIKES O
Window.
IME
O
PERATING
Operating the STAR TRAC S SERIES BIKE is very easy. Simply mount the bike, begin pedaling, and press QUICK START.
Learning the features and incorporating the STAR TRAC S SERIES BIKE into your members' fitness programs is just as easy.
In this chapter, you will learn the display function and how to get the most out of every STAR TRAC S SERIES BIKE workout.
IMPORTANT: Before operating the bike, you must be familiar with the following equipment limitations:
Maximum Weight: Your STAR TRAC S SERIES BIKE is designed for a maximum user weight of 350 lbs/159 kg. DO
n
program, G
EST OAL
NOT exceed the maximum user weight.

SEAT ADJUSTMENTS

Proper seat positioning helps ensure maximum exercise efficiency and comfort, while reducing the risk of injury. Always adjust
the seat position prior to beginning your workout.
program, as
IMPORTANT: When adjusting the seat height for either bike, your knee should never completely "lock out" during any portion of
the cycle pattern.
Adjusting Seat Height (S-UB / S-UBx Upright Bike)
When sitting on the seat of your Upright Bike, your knees should be almost fully extended when the pedals are at the lowest
point of their rotation. To adjust the seat height:
NOTE: When raising the seat, the seat will ratchet up when pulled. When lowering the seat, you must use the seat release knob.
With the pedal at its lowest point of rotation, stand on the pedal with your knee slightly bent. To raise the seat, carefully lift up
on the "nose" of the saddle and raise the seat to the desired position (the seat release knob does not need to be pulled out). To
lower the seat, carefully pull out on the seat release knob (located at the rear of the seat tube) and lower the seat to the desired
position. Release the knob, ensuring that the spring retracts to its original position, and that the seat stays firmly in place.
Note your height adjustment (shown on the front of the seat post) for future reference. This number is the highest number visible
R
EART ATE
on the seat post.
Adjusting Seat Position (S-RB / S-RBx Recumbent Bike)
When sitting on the seat of your Recumbent Bike, your knees should be almost fully extended when the pedals are at the lowest
point of their rotation. To adjust the seat position:
Sit on the seat and grasp the seat adjustment handle (located under the seat). Lift up on the handle, and slide the seat forward or
backward on the seat carriage to the closest available position that allows your knees to be slightly bent toward the lower pedal.
Release the handle, ensuring that the spring retracts to its original position, and that the seat stays firmly in place.
Note your height adjustment (shown on the top of the seat rail either in front of or behind the seat) for future reference.

PEDAL STRAP OPERATION

The pedal straps should be adjusted to hold each foot comfortably but firmly on the pedal. Place your foot on the pedal, then
adjust the pedal strap as necessary. Pull the free end of the strap down to tighten. Press the release button to loosen.

DISPLAY PANEL FEATURES

Your STAR TRAC S SERIES BIKE is equipped to provide you and your users unlimited exercise opportunities. Experiment
with its features to find the right combination for your fitness regimen. The Display panel provides the operating controls and
display elements described in the following paragraphs, and is consistent for both the STAR TRAC S-UB / S-UBx UPRIGHT
BIKE and STAR TRAC S-RB / S-RBx RECUMBENT BIKE.
' M STAR TRAC S SERIES BIKES O
WNER S ANUAL
I
NSTRUCTIONS
' M
WNER S ANUAL
17