Operating Instructions; Seat And Handlebar Adjustment - Star Trac 7270 Owner's Manual

OPERATING INSTRUCTIONS

This section provides the instructions for making seat adjustments, handlebar adjustments, pedal strap
adjustments, and for controlling resistance.
PLEASE NOTE: In a club setting, we recommend each user be properly fitted on the bike by a certified
indoor cycling instructor.
Seat and Handlebar Adjustments
The Studio 3 offers vertical adjustments of the seat and handlebar, and horizontal adjustment of the seat. The
Studio 5 and Studio 7 offer vertical adjustments of the seat and handlebar, and horizontal adjustments of the seat
and handlebar.
To adjust the seat height on the Studio 3, Studio 5, and Studio 7:
Dismount the bike. Turn the seat height pop-pin counterclockwise and pull out on the pin to release it from its
current preset location. Raise or lower the seat to the desired height, then gently release the pop-pin. Raise or
lower the seat slightly, if necessary, until the pop-pin engages a preset hole, Turn the pop-pin clockwise to
secure. Be sure to tighten firmly.
To adjust the seat horizontal position on the Studio 3, Studio 5, and Studio 7:
Dismount the bike. Loosen the seat fore/aft adjustment knob by turning the knob counterclockwise. Move the seat
forward or back to the desired position and then tighten the tension knob by turning clockwise.
To adjust the handlebar height on the Studio 3, Studio 5, and Studio 7:
Loosen the handlebar height tension handle by turning the handle counterclockwise. Raise or lower the handlebar
to the desired height, then tighten the tension handle by turning clockwise. Be sure to tighten firmly.
Star Trac Studio Series Group Cycle Bikes Owner's Manual |
11