Table of Contents
Advertisement
5 Turn on the power using the switch at the back of the printer. The printer
will beep, indicating that no paper is in position for printing. The orange
PAPER indicator also shows this.
6 Now press the m
button. The paper bail will move clear of the paper,
and the paper will be fed and adjusted past the print head to a position
ready for printing. The paper bail will be moved back to grip the paper
against the platen, and the print head will move to the start position.
The actual vertical position of the paper after auto-loading is determined by
the Memory Switch setting (see Chapter 3).
The vertical position of the paper can be finely adjusted by means of the
micro feed function (see Chapter 2).
Fanfold paper (continuous) stationery
If you are going to use fanfold (continuous) paper, then you will need to use
the integral tractor mechanism assembly, situated under the rear cover of the
printer.
1 Remove the top and rear covers of the printer to insert the paper.
Clamp lever
/
8
Advertisement
Table of Contents
