Star Micronics XB24-10 User Manual page 72

Sound buzzer
<BEL>
07h
7
Both
The command above sounds the printer's buzzer. There are no parameters.
1 Disable paper-out detection
Both 1
1Bh
38h
27 56
The command above disables the printer's paper-out detection. There are no
parameters. This overrides the setting made by the Memory Switch settings (Chapter
3).
Enable paper-out detection
cEsc>
9
1Bh
39h
Both
1 27
57
1
The command above enables the printer's paper-out detection. There am no
parameters. This overrides the setting made by the Memory Switch settings (Chapter
3).
Enabte/disable bidirectional printing
<ESC> U <ID
1Bh 55h
-30
27 85 Cn>
Both
The command above enables OT disables bidirec tional printing, where OI> is a binary
value of either OOh or 01 h or an ASCII value of either "0" or "1". If cn> is set to OOh
or "O", then bidirectional printing will be performed, and if it is Olh or "l", then
unidirectional printing will be performed subsequent to the receipt of this command.
If the Memory Switch setting has been made for bidirectional printing, this
command will be ignored.
64