Star Micronics XB24-10 User Manual page 44

Cancel emphasized print mode
<ESC> F
1Bh
46h
Both
1 27
70
The command above cancels the emphasized print mode. There are no parameters.
All characters printed subsequent to receipt of this command will be printed in non-
emphasized mode (cancelling the effect of the cESC> E command).
Select double-strike printing
<ESC> Q
Both
1Bh 47h
27 71
The command above will select the double-strike print mode. There are no parame-
ters.Anycharactersprintedsubsequenttothemceiptofthiscommand willbeprinted
in double-strike mode.
Cancel double-strlke printing
<ESC> H
1Bh 48h
27
72
Both
The command above will cancel the double-strike print mode. There are no
parameters. Any characters printed subsequent to the receipt of this command will
be printed in non-double-strike print mode (cancelling the effect of the cESC> G
command).
Select/cancel underline
Both
<ESC>
C?D
1Bh 2Dh
<n>
27
45
Cn)
The command above will select or cancel underlining, where cn> is a binary or
ASCII value which may take the values OOh through Olh or "0" through "1". If the
value is OOh or "0". then underlining will be cancelled. If or>=01 h or "1". then all
printable characters including spaces (but excluding horizontal tabs and IBM block
graphic characters) will be underlined.
36