Star Micronics XB24-10 User Manual page 52

Reverse feed to top of form
<ESC> <FFB
Both
1 1Bh OCh
27 12
The command above reverses the paper to the top of the form. There are no
parameters. On receipt of this command, the paper will be fed backwards to the top
of the current page. A carriage return (to the left margin) will also take place. This
command is invalid if the ASF has been selected.
1 Set page length (In inches) Both 1
cESC> C
1Bh
43h
27 67
<NuL>
OOh
0
<n>
<n>
<?D
The command above sets the page length in inches, where <n> is a binary value
(llu0122 in standard mode, lI<n>1255 in IBM mode) representing the new page
length in inches. The bottom margin is reset, and the current line after execution of
this command is made the new top of form.
1 Set page length (in lines) Both 1
1 <ESC>
1Bh
43h
27
67
The command above sets the page length in lines, where <n> is a binary value
(ll<n>1127 in standard mode, Ken>1255 in IBM mode). The new page length is
set according to the current line spacing value. Subsequent changes of the line
spacing value will not affect the page length. The bottom margin is reset, and the
current line after execution of this command is made the new top of form. This com-
mand is invalid if the
line
spacing is set to 0.
44