VW Golf VII / Golf VII Sportsvan / Passat and Skoda Superb
Coolant Circuit for TDI Front-Wheel Drive
Any coolant running off should be collected in an appropriate container. Route hoses kink-free. Un-
less specified otherwise, always fasten using cable ties. Position clamps so that other hoses cannot
be damaged. The heater must be filled with coolant when installing the hoses.
The connection should be modelled on an 'inline' circuit and based on the following diagram:
G
F
E
D
All spring clips without a specific designation
1 = EGR!
2 = Original vehicle spring clip
3 = Original vehicle hose
Ident. No.: 1325133C_EN
A
B
C
.
Status: 09.06.2017
Ø 18x20
Ø 27
2
= 25 mm dia. All connecting pipes
1
2
3
= 18x18 mm dia.
© Webasto Thermo & Comfort SE
Hose rout-
ing dia-
gram
46