Technical Specifications; Applicability Of Technical Specifications; General Technical Specifications - Siemens SIMATIC IPC677E Operating Instructions Manual

Technical specifications

8.1

Applicability of technical specifications

Note
The following technical specifications only apply under the following conditions:
• The device is in good working order.
• The device is closed.
• The I/O devices fulfill the requirements for the respective area of application (interference
emission according to EN 61000-6-4 / IEC 61000-6-4, interference immunity according to
EN 61000-6-2 / IEC 61000-6-2).
8.2

General technical specifications

See the note in "Applicability of technical specifications (Page 111)".
Article numbers
Dimensions IPC677E
(W x H x D in mm)
Weight
Supply voltage AC
Supply voltage DC
Input current AC
Input current DC
Line voltage frequency
Short-term voltage interruption in
accordance with Namur
Max. power consumption AC and DC Active power 176 W
Degree of protection
Protection class
Safety specifications
SIMATIC IPC677E
Operating Instructions, 04/2019, A5E45117996-AA
6AV7261-.....-.... (for details, refer to the ordering documenta-
tion)
19"
464 x 294
19"
9.5 kg
Nominal 100 V AC to 240 V AC (-15% / +10%) (wide range)
Nominal 24 V DC (-20% / +20%), SELV
1
Continuous current up to 2.5 A (up to 50 A for 1 ms at startup)
Continuous current up to 8 A (up to 14 A for 20 ms at startup)
50 Hz to 60 Hz (47 Hz to 63 Hz)
max. 20 ms (at 93 to 264 V)
(max. 10 events per hour; recovery time at least 1 s)
IP20 - Front when installed IP65 according to IEC 60529
Protection class I to IEC 61140
IEC 61010-2-201
•
EN 61010-2-201
•
UL 61010-2-201
•
CSA C22.2 No. 61010-2-201
•
22" 24"
529 x 331 585 x 363
22" 24"
10.5 kg 12.5 kg
1
8
111