Identification Data Of The Device - Siemens SIMATIC IPC677E Operating Instructions Manual

Mounting and connecting the device
3.1 Preparing for mounting
3.1.3

Identification data of the device

The device can be clearly identified with the help of this identification data in case of repairs
or loss.
The following illustrations are examples. The data of your device may differ from the data in
these examples.
Nameplate
The following image shows the nameplate on the SIMATIC IPC677E as an example.
COA label
Microsoft Windows "Product Key" is the "Certificate of Authenticity" (COA):
The COA label is only available for devices delivered with Microsoft® Windows® operating
system installed and is located on the rear of the device.
Example of COA label for the Microsoft® Windows® 10 operating system:
The Microsoft® Windows® 10 COA label has an additional security feature which conceals
part of the product key.
● The scratch-off panel consists of a small transparent label with a silver-colored scratch
coating, which was applied to conceal part of the 25-character product key. This scratch-
off panel is designed to protect the product key from being obtained and used by
unauthorized third parties.
● You usually do not need this product key for commissioning because a valid product key
has already been integrated into the pre-installed operating system.
See also
Important instructions and manuals for operating the device (Page 11)
36
Operating Instructions, 04/2019, A5E45117996-AA
SIMATIC IPC677E