Maintaining and servicing your device
7.4 Removing and installing hardware
7.4
Removing and installing hardware
7.4.1
Replacing device fans
Requirement
● The device is disconnected from the mains and all connecting cables have been
removed.
● The device is open, see important information regarding this under Opening the Device
(Page 71).
● An original spare part, that is a fan of the same type, see information under Accessories:
Hardware (Page 22).
Procedure - Removal
1. Remove the two screws
2. Loosen the plastic rivets.
92
①
and remove the air guide pulling it up vertically.
Operating Instructions, 04/2019, A5E45117996-AA
SIMATIC IPC677E