Running A Test Print; Hex Dump Mode - Star Micronics TSP200 Series Technical Manual
Star micronics technical manual thermal printer tsp200
Hide thumbs
Also See for TSP200 Series:
- User manual (138 pages) ,
- Programmer's manual (80 pages) ,
- Installation manual (46 pages)
Table of Contents
Advertisement
SPECIFICATIONS AND OPERATION
5.
Running a test print
To generate a test print, hold down the FEED switch while setting the power on.
6.
HEX dump mode
To enter HEX dump mode, hold down the ONLINE switch while setting the power on, and then release the switch after
the buzzer beeps once.
When this mode is active, all data sent from the host will be printed in HEX form.
– 8 –
Advertisement
Chapters
Table of Contents
