Main Logic Board; Fuses - Star Micronics TSP200 Series Technical Manual

PARTS REPLACEMENT
6
4
4
5
1
3
7 6
7
8
2
1
2
6.

Main Logic Board

(1) Remove the upper case unit. (See 1. above.)
Remove the connector cover 1.
(2)
Remove the main chassis unit 3 from the lower
(3)
casing unit 2.
(4) Remove:
Two tapping screws 4
Board chassis unit 5
Two tapping screws 6
Two screws 7
Connector
Main logic board 8
7. Fuses (TSP200-120/230)
(1) Remove the main chassis unit from the lower casing
unit. (See 5. above.)
(2) Check the fuses in the power unit.
Fuse F1 1
Fuse F2 2
If fuse is blown, replace it with the fuse type
indicated below.
Destination
U.S.A.
EC
United Kingdom EAWK630mA
If the replacement fuse also blows out, replace the
power unit or check the main logic board.
– 32 –
F1 F2
5TT1A 5TT3A
EAWK630mA EAK3.15A
5TT3A