Siemens SENTRON 3WL10 Manual page 12

Identifying cost-cutting potential
The power monitoring software has been tested by the TÜV Rheinland for its suitability to
support an energy management system in accordance with ISO 50001.
Functionality and user-friendliness
The salient features and functions of the power monitoring software are as follows:
● Good scalability
● Enhanced report templates
● Reaction plans
● Mass parameterization
● Virtual measuring points for computing customer-specific parameters
● Load monitoring function for monitoring specified power limits for freely definable time
periods
● Switching recommendations in the event of limit violations
● Remote control of circuit breakers
You can find more information on energy management with powermanager in the Internet
(https://new.siemens.com/global/en/products/energy/low-voltage/components/sentron-
measuring-devices-and-power-monitoring.html).
Commissioning and service
powerconfig is a commissioning and service software application for communication-capable
measuring devices and circuit breakers from the SENTRON product family. Its main
functions are as follows:
● powerconfig facilitates parameterization of the devices, resulting in considerable time
savings, particularly when several devices have to be set up.
● With powerconfig, the SENTRON circuit breakers and the 7KM and ATC measuring
devices can be parameterized, documented, operated, and analyzed using various
communication interfaces.
● powerconfig can be used to archive settings electronically and as printouts.
Communication 3WL10 Air Circuit Breakers & 3VA27 Molded Case Circuit Breakers
System Manual, 06/2019, L1V30499596021-01
1.6 3WL10 / 3VA27 circuit breakers
Introduction
11