Connecting To A Power Outlet And Turning Power On And Off - Star Micronics LC-8021 User Manual

Important!
Never try to move the print head while the printer is plugged into a power
outlet. Doing so can damage the printer. If you have just used the printer, let
the print head cool for a few minutes before you touch it.
Pull on the ribbon guide below the print head to detach it.
Pull on the top of the ribbon cartridge and then carefully lift up the
cartridge to remove it from the printer.
Use the procedure under "Removing the protective materials" on page 5 to
install a new cartridge.

Connecting to a power outlet and turning power on and off

Make sure the power switch on the front of the printer is in the OFF
position (O).
Connecting to a power outlet and turning power on and off
O N
9