Table of Contents
Advertisement
6
Printer Setup
Installing the ribbon cartridge
Make sure that the printer is unplugged from its power outlet.
Open the front cover of the printer.
Note:
You will probably find later steps to perform if you remove the cover.
By hand, move the print head to the left as far as it will go, where there is a
cutout to allow easy installation and removal of the ribbon cartridge.
Important!
Never try to move the print head while the printer is plugged into a power
outlet. Doing so can damage the printer. If you have just used the printer, let
the print head cool for a few minutes before you touch it.
Carriage
Advertisement
Table of Contents
Troubleshooting
