Connecting To A Power Outlet And Turning Power On And Off - Star Micronics LC-6211 User Manual

By hand, move the cartridge holder to the center position of the paper guide
where there is a cutout to allow easy installation and removal of the ribbon
cartridge.
Important!
Never try to move the print head while the printer is plugged into a power
outlet. Doing so can damage the printer. If you have just used the printer, let
the print head cool for a few minutes before you touch it.
Using your thumb and forefinger to squeeze the two tabs on the ribbon
cartridge towards the center, carefully remove the cartridge from the holder.
Use the procedure under "Installing the ribbon cartridge" on page 5 to
install a new cartridge.

Connecting to a power outlet and turning power on and off

Plug the power cord of the printer into a standard power outlet whose
voltage matches the power rating noted on the label affixed to the bottom of
your printer.
Connecting to a power outlet and turning power on and off 7