Connecting To A Power Outlet And Turning Power On And Off - Star Micronics LC-8211 User Manual

11
OF F
ON
O
I
Connecting to a power outlet and
turning power on and off
Plug the power cord of the printer into a standard
power outlet whose voltage matches the power
rating noted on the label affixed to the bottom of
your printer.
Caution!
If the voltage marked on the bottom of your printer
does not match the voltage from the outlet you are
using, do not plug in the power cord. Contact your
dealer for assistance.
Set the switch on the front of the printer to ON to
turn power on, and to OFF to turn power off.
Caution!
Whenever you turn off the power, wait at least five
seconds before turning it back on; otherwise you
may damage the printer.
We recommend that you unplug the printer from the
power outlet whenever you do not plan to use it for
long periods. Because of the this, you should locate
the printer so that the power outlet it is plugged into
is nearby and easy to access.
At this point you may want to perform a test of the
printer to make sure it is working properly. See page
99 for details on how to perform tests.