Eds-2 Settings - Star Micronics LC-8021 User Manual

BANK C
Switches 1, 2: Top and bottom margins
Use these switches to specify the top and bottom margins for printing.
Switch
SW1
SW2
Switch 3: Head gap sensing for on each line
Specifies whether head gap sensing for on each line should be enabled (OFF) or
disabled (ON).
Switch 4: Control code FF
Control code FF (hexadecimal code 0C):
Specifies whether to eject paper (ON) or form feed (OFF).
Switches 5, 6: Waiting period for paper loading
Waiting Period
2.0 seconds
1.5 seconds
1.0 seconds
0.5 seconds
Setting
ON 1/6 top margin for cut-sheet paper
OFF 0 top margin for cut-sheet paper
ON 1/6 bottom margin for cut-sheet paper
OFF 0 bottom margin for cut-sheet paper
SW5
ON
OFF
ON
OFF
Meaning
SW6
ON
ON
OFF
OFF

EDS-2 Settings

33