Feeding A Passbook Into The Printer - Star Micronics LC-8021 User Manual

36 Paper Handling

Feeding a passbook into the printer

Use the following procedure to feed a passbook into the printer.
Open the pass book to the page you want to print on.
Check that the control panel's POWER indicator is flashing, which shows
that there is no paper in the printer.
Check to make sure that the control panel's MULTI-PART indicator is not
lit. If it is, press the control panel's MULTI-PART button.
Insert the open passbook (top first) into the printer as far as it will go,
sliding its left side against the printer's left guide.
Important!
If the passbook is not inserted straight into the printer, it will be considered a
loading error and the passbook will be ejected. Be sure to insert the passbook
correctly.
Inserting the passbook with its left side more than 7 mm to the right of the left
guide will be considered an error and the passbook will be ejected.
Pass book
The passbook will automatically be fed into the printer.
Start the printing operation from your software application.
After the printing is complete, press EJECT to eject the passbook from the
printer.
Document table
Control panel