Functions, Cu 352; Display Language - Grundfos Control MPC Installation And Operating Instructions Manual

8.7.57 Functions, CU 352 (4.5)

Fig. 108Functions, CU 352
Description
Make the basic settings of the CU 352 in this submenu.
CU 352 comes with most of these settings, or they are made at
start-up and normally not to be changed.
The service language, British English, can be selected for service
purposes. If no buttons are touched for 15 minutes, the display
will return to the language selected at start-up or to the language
set in

Display language

(4.5.1).
If the service language is selected, the symbol
Note
be shown to the right of the top line of all displays.
Setting range
• Activation of service language, British English.
• Re-activation of start-up wizard.
(After start-up, the wizard is inactive.)
• Selection of display language.
• Selection of display units.
• Setting date and time.
• Selection of password for menu "Operation" and "Settings.
• Setting of Ethernet communication.
• Setting of GENIbus number.
• Reading of software status.
56
8.7.58 Display language (4.5.1)
Fig. 109Display language
Description
Here you select the language for the CU 352 display.
Setting range
• English
• German
• Danish
• Spanish
• Finnish
will
• French
• Greek
• Italian
• Dutch
• Polish
• Portuguese
• Russian
• Swedish
• Chinese
• Korean
• Japanese
• Czech
• Turkish
• Hungarian
• Bulgarian.
Setting via control panel
• Settings > Functions, CU 352.
Factory setting
The display language is British English. It can be changed at
start-up.