Table of Contents
Advertisement
and pressing [NEXT] several times will list the other choices,
7 point
8.5 point
10 point
12 point
14 point
16 point
18 point
24 point
36 point
When the size you want appears on the screen, pressing [ENTER] will
select it.
If you want to change the pitch, use the same procedure to select among 6.5,
8.1,10,12, or 16.66 characters per inch. For stroke weight, your options are
for bold (+l through +7), medium (0). and light (-1 through -7). In each
case, select your choice by pressing [ENTER].
If you am in Epson emulation, you may also select other parameters by
pressing [PREVIOUS] until the screen displays
CHARACTER
l
Now press [ENTER], then [NEXT] so the screen reads
SETUP PARAMS
The choices here are
Proportional spacing on or off
Enabling italics or graphics
Enabling boldface
l
Again, when the parameter you want to change appears on the screen,
press [ENTER], then [NEXT] to see yourchoices. When you seethe one
you want, press [ENTER] to select it.
60
Advertisement
Table of Contents
