Table of Contents
Advertisement
Now grasp the fixing roller cleaner by the two prongs in the center and
install it in the slot you have just cleaned.
Finally, close the green lid. It will not close tightly, but don't force it down,
Now it is time to install the toner cartridge. Pick up the sealed package that
contains it. You will see the letters
EP-S
stamped on one end. This is at the
bottom of the cartridge, so turn it over, and snip open the foil. Be careful to
grasp the cartridge only at the instruction panel and the other long end, not
in the middle. This is to prevent disruption of its moving parts.
Holding the cartridge with two hands, rock it back and forth 5 or 6 times,
as shown below, so that it moves through about 90 degrees.
-
-
-
14
Advertisement
Table of Contents
