Table of Contents
Advertisement
INTERFACE
SET INIT. VALUES
SET POWER-UP
LOAD FACTORY SET
You move from one item to the next in this level by pressing
[NEXT].
Pressing
[ENTER]
displays the next item of the next higher level. If no such
item exists,
[ENTER]
displays the value that is to be selected with @ added.
[ON LINE]
ends the program mode. Pressing
[PREVIOUS]
returns the display
to the last item at the same level you are currently in. Pressing
[EXIT]
displays the last item at the next lower level.
Here's how this works in real life, using a portion of the COMMAND group
hierarchy. Set the printer off line and press
[PROGRAM]
so the display reads
PROGRAM MODE
Press
[NEXT]
until the display reads
COMMAND
Then press
[ENTER]
until the display reads
EMULATION
Pressing
[ENTER]
will display one of the following:
HP LaserJet III
IBM Proprinter
EPSON EX-800
LincPage
Cartridge 1
Cartridge 2
Pressing
[NEXT]
continuously will list all the available emulations.
Suppose you want to select Epson EX-800 as the emulation.
41
Advertisement
Table of Contents
