Table of Contents
Advertisement
i
.-
L.
/
3.
_-
j
!
.-.
;
[,
I
-
/
i
/ ,.
-.
.
-..
-..
2. Rock the cartridge back and forth several times, as you did before initial
installation. Be careful not to rock it too vigorously, to avoid toner
discoloration of future prints.
3. Return the cartridge to the printer, and close the lid.
4. Plug the printer back into the wall socket and restart the printer. Then
make several test prints to examine print quality.
Dark Streaks or Stains
Dark areas on a printed page indicate that several areas of the printer need
cleaning. Before starting these procedures, unplug the printer. Open the
printer cover and remove the toner cartridge. As always, use caution near
the fixing assembly, as it may be hot.
Primary corona wire- This is located within the toner cartridge. Take
the wire cleaner stored inside the printer, and insert it in one end of the
slot, making sure it goes in as far as possible. Move it back and forth the
length of the slot.
107
Advertisement
Table of Contents
